Description
Features
- Pure Sinewave for Sensitive Electronics & Motorised Loads.
- Microprocessor Control Optimizes Reliability.
- Input Power Factor Correction.
- Output Power Factor 1.0.
- Comprehensive Display Allows Easy Monitoring & Access of UPS Status.
- Built-in MPPT solar charger.
- 2 x USB 5 V DC output and 2 x 12 V DC output.
- Battery cut off switch for safety.
- Pre-installed batteries.
Inverter Battery
- Rated power: 2000 W.
- Output voltage: 220 VAC.
- Output frequency: 50 / 60 Hz.
- Output waveform: Pure Sine Wave.
- Battery Voltage: 24V.
- Battery Specifications: 100Ah 12V x 2.
Solar Input
- Maximum photovoltaic voltage (VDC): ≤ 150 V
- Charge voltage (VDC): 35 V – 150 V
- Rated charge current (A): 30 A
- Maximum power (Wp): 800 Wp
- Voltage overcharge protection (VDC): 28.4 V
- Voltage overcharge recovery (VDC): 28.0 V
- Voltage of floating charge (VDC): 27.4V
DC Output
- Voltage of high-voltage protection (VDC): 32 V
- Voltage of high-voltage recovery (VDC): 32.4 V
- Voltage of low-voltage recovery (VDC): 25.2 V
- Voltage of low-voltage protection (VDC): 22V
- 5 V DC USB Output port: 2 Units / MAX 2 A
- 12 VDC Output port: 2 DC Ports (Max 2 A)
- Starting temperature of the exhaust fan: > 45ºC
- Ambient temperature for operation: 0 – 40ºC
- Ambient temperature for storage: -25 – +55ºC
- Operation / storage conditions: 0-90% (No Condensation)
General
- Charge by a mains supply rated voltage: 220VAC.
- Charge Current: 30A(max).
- Product dimensions: 380 mm x 380 mm x 520 mm.
- Warranty
- 1 Year (Electronics)
- 6 Months (Batteries)
Battery (2 x 12V/100Ah Gel Battery)
- Rated Voltage: 12V/Battery (Note this is a 24V System).
- Capacity (10hr,1.80V/Cell): 100Ah.
- Weight: 31.5Kg.
- Max Discharge Current: 30I10A(3min).
- Max Charge Current: ≤0.25A C10.
- Self- Discharge (25℃): ≤3%/month.
- Recommended Using Temperature: 15°C~25°C.
- Cover Material: ABS.
- Dimensions: 407mm x 174mm x 209mm.
